Tempo FSP200-KIT2 FSP200 Contractor Fusion Splicer Kit

INCLUDES:
• (1) FSP200 Optical Fusion Splicer
• (1) FCL200 Optical Fiber Cleaver
• (1) Fiber Optic Stripper
• (1) Extra Battery
• (1) Tweezers
• (1) Extra Set of Electrodes
• (1) USB Cable
• (1) 250um Adapters (Pair)
• (1) 900um Adapters (Pair)
• (1) SC/LC SOC Adapter

FEATURES:
• (1) Splice on Connector Oven Insert
• (1) Allen Key
• (1) Power Supply
• (1) Line Cord
• (1) Carrying Strap
• (1) Cooling Tray
• (1) Battery
• (1) Electrode Cleaner
• (1) Carrying Case
• Core alignment
• Lowest insertion loss splicing technology
• Seven seconds splicing
• Five second boot time
• 200 complete cycles per battery charge
• Compact and light weight for the most demanding jobs
• Compatible with loose tube fibers
• Screen shot capable

SPECIFICATIONS:
• Drop tested to 76cm
• Eighteen second shrink time
• 5,000 burns electrode life
• Attenuation mode capable
• Password protection for anti-theft
• Compatible with splice on connectors, SC, LC, FC
• STIP52 compliant
• 3-year warranty
• Applicable Fibers: SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657); EDF
• Fiber Cleaved Length: 10mm
• Cladding Diameter: 100 to 1000µm
• Fiber Count: Single
• Fiber Aligning Method: Core Alignment
• Splice Loss: (Typical) 0.02 dB (SM); 0.01 dB (MM); 0.04 dB (DS); 0.04 dB (NZDS & BIF)
• Splicing Mode: 60 Preset / User Definable Modes
• Splice Time: 7 Seconds
• Boot Time: 5 Seconds
• Number of Splices Per Battery Charge: 200 (including 60mm heat shrink cycle)
• Splice Connector: SC, LC, FC, ST
• Arc Calibration Mode: Automatic & Manual
• Protection Sleeve Length: 60mm, 40mm, Micro Sleeves
• Ingress Protection: IP5X (Dust); IPX2 (Water)
• Storage of Splice Results: 5000 Results, 100 Screenshots
• Drop Test: 76cm on Five Axis
• Tension Test: 2N
• Fiber Display Magnification: 200x
• Tube Heating Time: 18 Seconds
• Attenuator Mode: 0.1 to 15 dB
• Electrode Life: 5000 Splices
• Display: 5″ Color LCD Touchscreen
• Connectivity: USB
• Vibration Resistance: 10Hz – 500Hz with a Spectral Density of 0.03 g2/Hz
• Password Protection: Yes
• Power Supply: 100 to 240V AC Adapter; Li-ion Battery (4400 mAh)
• Operating Conditions: Pressure: 0 to 16404′ (0 to 5,000 meters) Above Sea Level, Humidity: 0 to 95%, Temperature: -4 to +131F (-20 to +55C)
• Storage Temperature: -40 to +158F (-40 to +70C)
• Cleaver Applicable Fibers: SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657)
• Fiber Cleaved Length: 5mm – 20mm
• Cladding Diameter: 125µm
• Coating Diameter: 0.20 mm, 0.25 mm and 0.9 mm
• Fiber Count: Single and Ribbon (12)
• Cleaving Angle: < 1.5°
• Blade Life: 48000 Cleaves

The FSP200 optical fusion splicer uses core alignment technology, which allows the technician to reliably fuse fiber optic cables with low splice losses in as little time as seven seconds. The intuitive user interface keeps the learning curve short and enables the technician to be productive in a very short time. FTTx, P2P installations, and all standard fibers are supported with pre-qualified splicing profiles that can be modified and subsequently stored for more demanding fiber applications. The FSP200 uses the Tempo Communications Splice on Connector, which provides a low loss, low return loss, and reliable connection that surpasses the failure prone mechanical connector. Splice on connectors also allow for easier fiber routing, which reduces fiber preparation since the splice on connector is pre-cleaved and also eliminates the need for a splice tray. The FSP200 is available in the popular Contractor Kit (FSP200-KIT2) which bundles the fusion splicer, FCL200 cleaver, an extra battery, and fiber strippers so the technician has all of the tools they will need to get the job done right. The Splicer and Cleaver Kit configuration (FSP200-KIT1) includes the FSP200 fusion splicer and FCL200 cleaver. See the Models section below for more details. Backed by 3-year warranty.