Tempo MM810 High Precision, True RMS, Dual Display Multimiter

INCLUDES:
• (1) MM-810 Multimeter
• (1) Test Leads
• (1) Zipper Case

FEATURES:
• The MM810 is supplied with a zipper case and high-quality safety test leads
• True RMS response for AC measurements
• Dual display can show RMS and frequency, or RMS and DC
• 13 functions: Volts, ohms, current, frequency, duty cycle and logic frequency, mV, mA, uA dedicated ranges
• Continuity, diode, capacitance, relative measurements
• Millivolt and microampere ranges for precision measurements
• Fast response 41 segment “bar-graph” with 60 updates per second
• Dual display allows, for example AC V and frequency

SPECIFICATIONS:
• Core accuracy better than 0.1%
• 9999 or 6000 Count large digit LCD with 5 updates per second
• Display: 9999 Counts: ACV, DCV, Hz, and nS 6000 counts: mV, µA, mA, A, ohm, and Capacitance
• Polarity: Automatic
• Sampling Rate: Numeric Display: 5 per second 41-Segment Bar Graph Display: 60 per second
• Temperature Coefficient: Nominal 0.15 x (specified accuracy) per °C Below 18 °C or Above 28 °C
• Automatic: Shut-Off After 30 Minutes of Inactivity
• Noise Rejection: Normal Mode Rejection Ratio > 60 dB at 50 Hz and 60 Hz when Measuring DCV Common Mode Rejection Ratio > 60 dB from 0 Hz to 60 Hz when Measuring ACV Common Mode Rejection Ratio > 120 dB at 0 Hz, 50 Hz and 60 Hz when Measuring DCV
• Operating Conditions: 0 °C to 45 °C (32 °F to 113 °F), 0% to 80% Relative Humidity (non-condensing)
• Storage Temperature: –20 °C to 60 °C (–4 °F to 140 °F)
• Battery: 9-Volt (NEDA 1604, JIS 006P or IEC 6F22)
• µA and mA: 0.44 A/1000 V DC/AC rms, Interrupting Rating 10 kA, F Fuse,13/32″ x 1-1/2″
• A: 11 A/1000 V DC/AC rms, Interrupting Rating 20 kA, F Fuse, 13/32″ x 1-1/2″
• V: 1100 V DC/AC rms
• mV, O, and Others: 1000V DC/AC rms
• Safety: Double Insulation per IEC/UL/EN61010-1 Ed. 3.0, IEC/EN61010-2-030 Ed. 1.0, IEC/ EN61010-2-033 Ed. 1.0, IEC/UL/EN61010-031 Ed. 1.1 and CAN/ CSA-C22.2 No. 61010-1-12 Ed. 3.0 to Category IV 1000 VAC and VDC
• All Terminals: Category IV 1000 VAC and VDC

The MM810 from Tempo Communications is an advanced multimeter geared toward professional technicians and electricians. The MM810 is a highly accurate, high precision, True-RMS (TRMS), dual display multimeter with all the measurement features one is likely to need in the field.Built to international safety standards the MM-810 performs all the tests any electrician would want with the added precision of true-RMS response for AC measurements. Features like the BeepJack enhance safety and help prevent damage when leads are attached to the wrong terminals for the type of test selected. Fully auto ranging or manual, the choice is yours. The backlit LCD helps when testing in those awkward cupboards.13 functions: Volts, ohms, current, frequency, duty cycle and logic frequency, mV, mA, uA dedicated rangesContinuity, diode, capacitance, relative measurementsMillivolt and microampere ranges for precision measurementsAuto and manual rangesDual display can show RMS and frequency, or RMS and DCSupplied with custom-built fabric case